COVER
SHEET – / INDEX / SITE PLAN - The Cover sheet contains an
index of the sheets that will follow in the ESHP design development set of
plans. It will also include a gray scale elevation or rendering depicting the
look of the front of the home, and overall roof plan.
WALL SECTIONS -The Wall
Section sheet depicts one or more sections of the home’s exterior walls from
the foundation to the roof, calling out all materials and construction specifics.
FOUNDATION PLAN - The Foundation Plan sheet shows
the home’s foundation layout depicting plumbing, footing, support walls,
columns, etc., calling out the necessary notes, dimensions and details.
SECOND FLOOR FRAMING (where appropriate) - The
Second Floor Framing sheet shows important locations of beams and load-bearing
conditions, as well as the floor truss spacing and direction. The Second Floor
Framing Plan is meant as general information for the truss manufacturer.
FLOOR PLANS - The Floor Plan sheet(s), show
a detailed layout of the floor plans with dimensions, notes, call outs and keys
relating to sheets with sections and details needed by your builder for
construction. These plans will include window and door sizes and locations, and
will also show the location of bathroom fixtures.
ROOF PLAN & SOFFIT (CHASE LAYOUT) PLAN - The
Roof Plan sheet is a general layout of the home’s roof. It is meant as general
information for the truss manufacturer and framing contractor. This sheet
also contains the location and size of the dropped soffits housing the
forced-air chases. (Ducts in Conditioned Space – DICS) Energy Smart Home Plans
is the only design company that offers this information for those seeking truly
High-Performance Homes.
REFLECTED
CEILING PLAN - The reflected ceiling plan shows all ceiling heights,
treatments, and details including necessary notes.
EXTERIOR
ELEVATIONS - The Exterior Elevation sheet(s) depict elevations for all sides
of the home, showing dimensions and material notes and exterior detailing where
needed.
CROSS
SECTION & INTERIOR ELEVATIONS - The Cross Section sheet
depicts a section through the home revealing floor, ceiling and roof heights at
a strategic location. The Interior Elevation sheet shows conceptual interior
wall elevations for the Kitchen, Bathrooms, Utility Room as well as built-ins,
fireplaces and other unique interior features as per design. (Interior elevations may not be
available for all stock plans.)
ELECTRICAL
PLAN - The Electrical Plan sheet shows suggested wiring and location of
fixtures (lighting, ceiling fans, etc.), switches and outlets. This plan does
not contain diagrams detailing how all wiring should be run, or how circuits
should be engineered. Your electrician should work out these details
Total Heated Area:
1,644 sq. ft.
1st Floor:
1,644 sq. ft.
Attached:
442 sq. ft.
Porch, Front:
44 sq. ft.
Porch, Rear:
310 sq. ft.
Front:
0 sq. ft.
Garage:
442 sq. ft.
Bedrooms:
3
Full bathrooms:
2
Half bathrooms:
0
Standard Foundations:
Slab
Exterior Walls:
2x6 or Block / CMU (main floor)
Width:
49' 6"
Depth:
60' 0"
Max Ridge Height:
23' 6"
Type:
Attached
Area:
442 sq. ft.
Count:
2 Cars
Entry Location:
Front Cars
First Floor:
10.00'
Primary Pitch:
7 on 12
Framing Type:
Truss
Total Heated Area:
1,644 sq. ft.
1st Floor:
1,644 sq. ft.
Attached:
442 sq. ft.
Porch, Front:
44 sq. ft.
Porch, Rear:
310 sq. ft.
Front:
0 sq. ft.
Garage:
442 sq. ft.
Bedrooms:
3
Full bathrooms:
2
Half bathrooms:
0
Standard Foundations:
Slab
Exterior Walls:
2x6 or Block / CMU (main floor)
Width:
49' 6"
Depth:
60' 0"
Max Ridge Height:
23' 6"
Type:
Attached
Area:
442 sq. ft.
Count:
2 Cars
Entry Location:
Front Cars
First Floor:
10.00'
Primary Pitch:
7 on 12
Framing Type:
Truss
